LED Area Light Fixtures

Overview:

Designed as efficient, energy-saving replacements for metal halide and high-pressure sodium lighting fixtures, the MaxLED® line of LED Area Lights have a long life of 50,000 hours and operate on electrical systems ranging from 120 to 277 volts. Available in 70-, 100- and 140-watt versions, the series of MaxLED Area Lights is designed with an integral driver, and replace 250-, 320 and 400-watt metal halide fixtures. DesignLights Consortium®-qualified models are available.

LED-Area-Light-Fixtures-main-AreaLights.product.jpg

Validations & Accolades:

led-area-light-fixtures-val-dlc.fcc.cetl.AUS.jpg
Data Sheets and Specifications

Click here to view product specifications and download
data sheets.

Incentives for LED Area Light Fixtures:

Rebates for MaxLite Products are available. Click here or scroll to the Available Utility Rebates tab below to see rebates available in your area.

Ready to Buy LED Area Light Fixtures?

Find your local distributor here or MaxLite rep here.

Product Gallery

Save $1,329.60 in energy savings over the 50,000 hour lifetime of the fixture

If a 250-watt metal halide area light operating 12 hours a day was replaced with a 70-watt LED Area Light operating in the same conditions, electricity costs would be reduced 76 percent, from $152.42/year to $35.95/year, for a total of $1,329.60 in energy savings over the 50,000 hour lifetime of the fixture.

Occupancy sensor and building control compatible

Building control and dusk-to-dawn and occupancy sensor compatible, providing additional energy savings and reduced utility costs

50,000 hour life

50,000 hour life is more than 17 years operating 8 hours a day, based on L70 standards

Copper-plated LED modules

Copper-plated LED modules provide high thermal transfer rate and minimize the junction temperature of LEDs to maximize service life

IP65-rated heavy-duty housing and tempered glass lens

Heavy duty IP65-rated heavy-duty cast aluminum one-piece housing is TGIC Polyester powder coated and protected against rust, corrosion, dirt and insects

Reduced glare and improved light finish

Black ceramic frit on tempered glass that reduces glare and improves the overall light finish

Environmentally friendly and maintenance free

Maintenance-free and constructed without mercury or hazardous materials

Uniform color consistency

Engineered with proprietary binned LM-80-rated LED chips that provide uniform color consistency

Increased distribution of light

Wider Type 5 Optics increase the spacing distribution of light in desired areas

MaxFOCUS™ light collimator

Patent-pending MaxFOCUS™ light collimator and thermal pressure plate narrows and focuses light to achieve tight cutoff light levels, while reducing operational temperatures through improved thermal transfer